Warranty
Our products come with a twelve-month warranty. Warranty is only valid with professional equipment, application and proper use. In case of product failure contact our colleagues regarding further steps.
To the different product groups the following Terms of Use apply:
Wall Decoration, Wall Stickers, Wall Tattoos
Car Decoration, Motor Stickers, Bicycle Stickers
Wall Decoration, Wall Stickers, Wall Tattoos
The guarantee is valid only under proper equipment, sticking, and intended use. Please take the following points into consideration.
Colour accuracy
The colours available in the web shop highly depend on the monitor and other settings, therefore they are only approximate colours.
Cleaning, Surface preparation
Stick them on dry, dust-proof and fat-free surfaces. If you intend to stick on surfaces other than the wall (e.g. glass, mirror, furniture, etc.) use the mixture of shampoo, detergent and water for the cleaning beforehand. It is forbidden to use window cleaner, wax and furniture polish, because it results in improper adhesion. It is allowed to use alcohol and white spirit available in the paint shop.
Freshly painted surfaces
If you wish to stick the decoration on a freshly painted wall, wait one or two weeks instead, otherwise the decoration may blister due to evaporation from the paint.
Removing the transfer foil during sticking
The removal of the transfer foil highly depends on the quality of the wall. In case of a wall of proper quality, the foil can be removed without damaging the wall, although we cannot reimburse such damage.
Removing the decoration
The removal of the decoration highly depends on the quality of the wall. In case of a wall of proper quality, the decoration can be removed without damaging the wall, although we cannot reimburse such damage.
The guarantee is valid only under proper equipment, sticking and intended use. Please take the following points into consideration.
General
These stickers are for outdoor use, waterproof, UV stable, and can be varnished. (Further details for varnishing are provided later.)
Colour accuracy
The colours available in the web shop highly depend on the monitor and other settings, therefore they are approximate colours only.
Cleaning, Surface preparation
Stick them on dry, dust-proof and fat-free surfaces. Use the mixture of shampoo, detergent and water for the cleaning before sticking. It is forbidden to use window cleaner, wax and furniture polish, because it results in improper adhesion. It is allowed to use alcohol and white spirit available in the paint shop.
Size check
Before placing your order, check if the sticker for the motor is of the proper size. They can be different, depending on the age group.
Varnishing
The stickers can be varnished with water-based varnish. The result of using solvent-based varnish is vexed. It is often used, but it is not successful in all cases due to personal and technical conditions. Without previous experience you are recommended to make trial-varnishing. On request I will send some test materials. MS 2K varnish seems to the the best without dilution and blown in several thin layers.
We cannot reimburse damage caused by varnishing. Please do varnishing at your own peril.
Freshly painted surfaces
If you wish to stick the decoration on a freshly painted wall, you have to wait for the appropriate drying time; otherwise, the decoration may blister due to evaporation from the paint. Drying time for the paints may differ.
Guarantee time of some colours for extra charge
12-month guarantee does not apply to fluor colours and golden mirror foil, because these may prematurely fade. These colours have a six-month guarantee.
Rough surfaces
It is not recommended to stick on rough plastic surfaces as the foil cannot stick on them properly.
Suggestions after delivery
During the delivery the transfer foil on the sticker may become creased due to the high temperature in the vehicle. Please store it at room temperature for 1 to 2 hours, then it gets back its original size and it can be smoothed again. It does not ruin the quality of the sticker. Please, store it at room temperature henceforward.
Matching the colour of the varnishing and the stickers
In case of several types of motorbikes the colour of the sticker and the varnishing of the profiles should be the same. The colours of the foil may differ from the original colours. As the colour selection of the stickers is rather limited, in this case the colour of the varnish should be blended to match the colour of the sticker. This may cause problem when the motorbike is varnished only partially. For choosing the matching colour we can send a colour sample by post on request.
The guarantee is valid only under proper equipment, sticking and intended use. Please take the following points into consideration.
General
The canvas pictures are meant for indoor use only, and for average room conditions (temperature: between +10 and +25 C, humidity between 20-80%, exposure to direct sunlight maximum 1-2 hours a day, dry wall).
Colour accuracy
The colours that can be seen in our webshop depend on the settings of the screen, etc. to a great extent, so they are only approximate.
Storing
The canvas pictures are decorations that can be hung on the wall. In case this is not possible, they should be laid on an entirely flat surface, in a dry, moisture-free place. As our wedge frames are made of excellent quality dried wood, deformation can be excluded under such storing conditions. During storing the canvas should not be touched by anything or dented, as it can remain stretched out at the place of the dent.
Cleaning
The canvas picture should be cleaned by dry or wet, soft textile. If necessary, it can also be cleaned by a wet cloth using some neutral detergent.
Stretching of the canvas
In case of a bigger canvas picture the canvas may become loose over time. In this case you can easily stretch the canvas with the help of the wedges. There are 2-2 wedges in all the corners of the picture. When stretching, you have to hit each wedge equally with a hammer, very gently. At the corners of the stretchers you will see how they move away from each other. We are talking about millimeteres here. You must do this by laying or standing the picture on a soft surface so as not to cause damage on the canvas. Do not overstretch the canvas, stretch it only until it smooths nicely.
The guarantee is valid only under proper equipment, sticking and intended use. Please take the following points into consideration.
General
Laptop stickers are made for indoor use only, and for average room conditions (temperature: between +10 and +25 C, humidity between 20-80%, exposure to direct sunlight maximum 1-2 hours a day). They are waterproof and UV stable.
Colour accuracy
The colours that can be seen in our webshop depend on the settings of the screen, etc. to a great extent, so they are only approximate.
Cleaning
The sticker should be cleaned by dry or wet, soft textile. If very necessary, it can also be cleaned by a wet cloth using some neutral detergent. Some alcohol may also be used for cleaning.
Cleaning, preparing the surface
Stick them on dry, dust-proof and fat-free surfaces. Use a mixture of shampoo, detergent and water for the cleaning before sticking. It is forbidden to use window cleaner or wax because it results in improper adhesion. It is allowed to use alcohol.
Rough surfaces
It is not recommended to stick on rough plastic surfaces as the foil cannot stick on them properly.
Removal
Laptop stickers can be removed. In case there should remain some glue on the surface after peeling off, it can be removed with some alcohol. However, static-adhering foils do not leave any marks.
